Product Category: Free Standing Pumps
6124 - New Brass Plated Gold Panner
This very detailed depiction of an old gold prospector panning for gold is fine cast in poly-resin and then dual level electroplated with real brass. An antique patina is added to give the piece the quality metal finish of ancient bronze. Stands about four inches tall with a one inch long bolt extending from the More Info »6525 - Jobe 2 1/2 Hp Pump
This quality lightweight water pump is powered by a 2 1/2 horse power, 4 cycle gasoline engine. The pump and engine combination weighs only 27 pounds and is mounted on a shock-resistant base plate with a carry handle. The intake and discharge are both 1 1/2 inch with a maximum discharge of 3170 gph ( More Info »6526 - Jobe 6 1/2 Hp Pump
Inlet / outlet 2 inch, Maximum head 92 feet, Maximum suction head 26 feet, 4 stroke OHV forced air cooled, Steel roll cage, Isolation mounts, 1 gallon fuel tank, Recoil start, Sound rating 70db@ 20 feet, Weighs 54 pounds. Made in China. 90 day warranty.125 GPM Free Standing Centrifugal Pump
The P135 pump is designed for use with a 3 horsepower or greater engine and has a maximum head lift of 130 feet. The pump intake intake is a 2" slip, the discharge is a threaded 1.25" and the shaft size is 5/8". Discharge capacity is 150 gallons per minute.310 GMP Free Standing Centrifugal Pump
The P195 pump is designed for use with a 5 horsepower or greater engine and has a maximum head lift of 180 feet. The pump intake intake is a 2.5" slip, the discharge is a 2" threaded fitting and the shaft size is 5/8". Discharge capacity is 310 gallons per minute.350 GPM Free Standing Centrifugal Pump
The P285 pump is designed for use with a 8 horsepower or greater engine and has a maximum head lift of 200 feet. The pump intake intake is a 2.5" slip, the discharge is a 2" threaded fitting and the shaft size is 3/4". Discharge capacity of 350 gallons per minute.450 GPM Free Standing Centrifugal Pump
The P355 pump is designed for use with an 8 horsepower or greater engine and has a maximum head lift of 110 feet. The pump intake is a 4" slip, the discharge is a 3" threaded fitting and the shaft size is 3/4". Discharge capacity of 450 gallons per minute.600 GPM Free Standing Centifugal Pump
The P355S pump is designed for use with a 16 horsepower or greater engine and has a maximum head lift of 185 feet. The pump intake is a 4" slip, the discharge is a 3" threaded fitting and the shaft size is 3/4". Discharge capacity of 600 gallons per minute.Jobe 6 1/2 Hp High Pressure Pump W/Cage
This is a real workhorse to run a 3 or 4 inch dredge or a large highbanker dredge combo. The pump is made in the USA and the engine is made in China. Assembled in the USA. 6.5 horse power, Inlet 2 inch slip, Outlet 1 .5 inch mpt, 24 gallons per minute, Maximum head More Info »1500 GPM Free Standing Centrifugal Pump
The P1500 pump is designed for use with a 35 horsepower or greater engine and has a maximum head lift of 230 feet. The pump intake is a 5" slip, the discharge is a 4" threaded fitting and the shaft size is 1.25". Discharge capacity of 1500 gallons per minute.
