Seattle Gold & Prospecting

The purpose of the safety snorkle is to help prevent carbon monoxide inhalation by keeping the air intake away from engine exhaust. The KAS1 is made specifically for use with T80 compressors and is super easy to install. Remember, safety first!

They say an ounce of prevention is worth a pound of cure. Prevent carbon monoxide inhalation by keeping the air intake away from engine exhaust with this KAS2 safety snorkle. Made specifically for use with 263 compressors and is a breeze to install.

The Basic Tote Float is all about the basics. Molded Marlex shell with shock mounted bolts and 4 snap lanyards are what you get with this simple package. Get your own inner tube and you are ready to float!

A smaller version of our Large Tote Float but there is nothing small about the features. The Marlex shell not only gives a rigid form for the inner tube but also provides for a stable, low center of gravity. The inner tube flotation on this model can support up to 60 pounds. Equipped with 4 More Info »

This floating wonder securely holds your small compressor system and floats it where you need it. A stable, low center of gravity flotation is facilitated by the molded Marlex shell frame. The Tote Float utilizes a truck tube for its flotation and can support up to 100 pounds! The shell provides a rigid form for More Info »

This is a medium duty diaphragm compressor with pressure relief valve. The T80 compressors are recommended for shallow diving conditions including dredging, hull cleaning, boat and dock maintenance, pool repair, crustacean harvesting, spear fishing or general sport diving. Factory recommended RPM is 1800 5/8" keyway shaft Produces 1.8 CFM at 45 PSI Pulley is not More Info »

The T80E motor driven compressor is powered by a 1/2 horsepower capacitor start, 115 volt electric motor.Shock mounted to a heavy duty corrosion resistant base and features a 6 foot cord with switch. Produces 1.8 CFM at 45 PSI.

This is one heavy duty, teflon piston compressor with pressure relief valve. This compressor is recommended for deep diving, dredging, urchin and cucumber diving, hull cleaning, boat and dock maintenance, crustacean harvesting or even spear fishing! Comes complete with pulley and produces 6 CFM at free air or 5 CFM at 40 PSI. Recommended RPM More Info »

A potent 3.5 horsepower Briggs and Stratton engine with recoil starter drives this compressor. Shock mounted on a heavy duty corrosion resistant base and comes with a KAS1 Safety Air Snorkle. Produces 1.8 CFM at 45 PSI.

The same fabulous heavy duty 263 teflon piston compressor but a step beyond. The compressor has been mounted directly to a 3/4 horsepower electric motor with capacitor start! This little package is very portable and compact, making it ideal for mounting on boats equipped with generators. The motor can be run on 110 or 220 More Info »

This compressor system features a 4 horsepower Honda engine drives this compressor. Equipped with a KAS1 Safety Air Snorkle and shock mounted on a heavy duty corrosion resistant base. Produces 1.8 CFM at 45 PSI.

This is our 263 Model compressor, belt driven by a 3.5 horsepower Briggs and Stratton engine with recoil starter. Shock mounted on heavy duty, corrosion resistant base and includes a KAS2 safety air snorkle. Produces a maximum of 125 PSI. 5 CFM at 40 PSI. 6 CFM at free air.

The HydroAir is a lightweight and highly efficient air supply diving system. The HydroAir is powered by a group 24 deep cycle marine battery or other similar 12 volt battery configuration. The dual air compressor system maximizes battery life by working only on demand by use of pressure switches. The compressors are mounted under water More Info »

The 263 compressor gets driven by a 4 horsepower Honda engine on this model. Complete with corrosion resistant shock mounting and our KAS2 safety air snorkle. Produces a maximum of 125 PSI. 5 CFM at 40 PSI. 6 CFM at free air.